John Deere
DH52 Series Offset Disks
- Adjustable blade scrapers increase productivity
- Notched or smooth disk blades available in two sizes
- Durable Clevis hitch
- Oil bath tapered roller bearings minimize maintenance
Specifications
- Disk gangs - Front angle: 2 Positions
- Set-up time - Labor hours: 2-3 for two people
- Disk gangs - Bearing type: Oil Bbth tapered roller
- Transport - Ground clearance with base blades: 20.3 cm
8 in. - Tractor requirements - Recommended drawbar hp range: 126.8-149.1 kW
170-200 hp - Disk gangs - Scrapers: Adjustable
- Lighting and safety - Lights: Yes
- Disk gangs - Rear angle: 2 Positions
- Disk gangs - Bearing wear plates: Standard
- Weight - Net: 5012.2 kg
11050 lb - Working - Approximate working width: 5.8 m
19 ft - Tires - Wheel hub type: 8 Bolt
- Disk blades - Spacing: 26.7 cm
10.5 in. - Tires - Size: 12.5L x 15 10 ply in.
- Frame - Duty: Medium
- Weight - Weight per disk blade: 116.6 kg
257 lb - Disk blades - Quantity: 45
- Warranty - Time period: 1 year
- Transport - Width: 6.1 m
20 ft - Disk blades - Type: Notched (front) Notched (rear)
Standard
Smooth (front) Smooth (rear)
Optional
Notched (front) Smooth (rear)
Optional - Available blade sizes - Blade option two: 711x7.9 mm
28x0.312 in. - Frame - Tube size: 15.2x15.2x0.95 cm
6x6x0.375 in. - Available blade sizes - Blade option one: 660x7.9 mm
26x0.312 in. - Lighting and safety - Markings: SMV
- Transport - Wheel hub bearings: Dual tapered roller bearings
- Disk gangs - Bearing standards: Welded, Reinforced
- Disk blades - Blade concavity: Standard: high
Optional: low - Frame - Type: Single offset rigid
- Tires - Type: Implement - Quantity of 4
- Disk gangs - Axle material: Round heat treated alloy steel threaded on both ends
- Lighting and safety - Safety tow chain: Yes
- Working - Maximum penetration: 22.9 cm
9 in. - Tractor requirements - Recommended PTO hp range: 149-175 kW
200-235 hp - Disk gangs - Axle size: 4.1 cm
1.625 in.
or 5.4 cm
2.125 in. - Hitch - Front hitch type: Spade
Overview
Adjustable disk blade scrapers increase productivity
Scrapers clean disk blades
Scrapers work great in wet and sticky soils
Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.
Disk blades (notched or smooth) available in two sizes
Notched disk blades
Smooth disk blades
Disk blades are available in 66-cm or 71-cm (26-in. or 28-in.) diameters. Disk blades are available in smooth blades, notched blades, or a combination of front notched blades and rear smooth blades to meet a variety of needs.
For superior penetration in tough soil conditions, weight per blade ranges from 108.9 kg to 154.7 kg (240 lb to 341 lb) depending on the offset disk series and model.
End washers and wrenches keep gang shaft end nut tight
Keeping gangs tightened increases wear life
Gang nut wrenches are always there when needed
End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.
Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.
Rear hitch for attaching an additional implement
Allows operator to pull an additional implement
A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag.
Clevis hitch is durable for those tough working conditions
Clevis hitch makes hookup easy
Clevis hitch is built strong for tough jobs
The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.
Transport locks secure disk wings
Transport locks secure disk wings cylinder
Transport locks are standard, ensuring disk wings are in secure transport mode.
Oil bath tapered roller bearings minimize maintenance
Minimal maintenance increases work hours
Sealed with industrial-grade seals
Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.
Two separate control arms create consistent performance
Control arms level in ground and during transport
Easy to set for desired soil condition
Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.