- Moldboard frame pivots with the bottoms
- Plastic moldboard and steel shins
- Landsides with wedges
- Front gauge wheels
Integral on-land hitch provides excellent maneuverability
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
- Category 3/3N Quik-Coupler compatible
- Tractor rockshaft lever controls the raising and lowering of the plow
- Maximum plowing depth to 356 mm (14 in.)
- Provides ample clearance between the tractor tires and the plow
Rear gauge wheels come in standard equipment
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
- Equipped with 6.70-15 tires for good flotation
- Easy turnbuckle adjustment on rear gauge wheel
- Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
V-style mainframe distributes weight for good penetration
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.
The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
Moldboard frame pivots with the bottoms
All 995 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
- Requires less 3-point hitch capacity
- Requires less ballasting of the tractor front end
- Eliminates initial cost and service requirements for one complete set of standards and bottoms
Adjust front gauge wheels to limit plowing depth
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.
No. Of Bottoms
Option 3 | 7 |
---|---|
Option 1 | 5 |
Option 4 | 8 |
Option 2 | 6 |
Horsepower Required
Option 1 | 5-bottom: 96.9-123 kW 130-165 hp |
---|---|
Option 4 | 8-bottom: 149.1-186.4 kW 200-250 hp |
Option 3 | 7-bottom: 130.5-149.1 kW 175-200 hp |
Option 2 | 6-bottom: 111.9-130.5 kW 150-175 hp |
Hitch
Type | Category 3N or 3 |
---|---|
Steering | Integral, in-furrow No Integral, on-land Yes Semi-integral, on-land No Drawn, in-furrow No Drawn, on-land No Quick-coupler compatible Yes |
Reversible | Type of reversing Hydraulic cylinder Yes |
Weight (approximate)
Option 4 | 2,440 kg 5,368 lb |
---|---|
Option 3 | 2,041 kg 4,500 lb |
Option 1 | 1,678 kg 3,700 lb |
Option 2 | 1,860 kg 4,100 lb |
Key Specs
Plowing depth | 35.6 cm 14 in. |
---|---|
Option 3 | 7-bottom: 130.5-149.1 kW 175-200 hp |
Option 4 | 3.7 m 12 ft |
Option 3 | 3.2 m 10.5 ft |
Horsepower required - Option 1 | 5-bottom: 96.9-123 kW 130-165 hp |
Option 2 | 2.7 m 9 ft |
Option 2 | 6-bottom: 111.9-130.5 kW 150-175 hp |
Option 1 | 2.3 m 7.5 ft |
Option 4 | 8-bottom: 149.1-186.4 kW 200-250 hp |
Standards
Spring reset | No |
---|---|
Shearbolt | Standard |
Safety trip | Optional |
Hydraulic | No |
Total Width Of Cut
Option 2 | 2.7 m 9 ft |
---|---|
Option 1 | 2.3 m 7.5 ft |
Option 3 | 3.2 m 10.5 ft |
Option 4 | 3.7 m 12 ft |
Bottoms
Option 1 | Plowing depth 35.6 cm 14 in. Steel moldboard |
---|---|
Option 2 | Plastic moldboard |
Frame
Option 1 | Thickness: 17.8x10.2x0.8 cm 7x4x0.313 in. |
---|
Clearances
Vertical | 81.3 cm 32 in. |
---|
- Required HP (PTO): 23 to 35 (16.4-26.1 kW)PTO HP/bottom
- Working Speed: 5 mph (8 km/h)
- Residue Conditions: medium/heavy
- Depth Control: gauge wheels
- # of bottoms: 5, 6, or 7
- Working Depth: up to 14 in (356 mm)