John Deere 2680H High Performance Disk

Disks


How can we help?

(309) 365-2031

  • Cover more acres at 10-14 mph (16-22.5 km/h)
  • Mix and bury residue for faster breakdown
  • Individually mounted blades
  • Provides a consistent field finish in spring or fall
  • Cover more acres at 10-14 mph (16-22.5 km/h)
  • Mix and bury residue for faster breakdown
  • Individually mounted blades
  • Provides a consistent field finish in spring or fall
Features
Specifications
Details

Features

  • Residue Conditions: Easy to set shims
  • Weight /blade: light/medium/heavy
  • Models: 2-6 inches (51-152 mm)
  • Required HP (Engine)/FT: A210 - 380 lbs (95.25-172.4 kg)*
  • Working Depth: 10 to 14 mph (16-22.5 km/h)
  • Working Speed: 11-15/ft. (26.9-36.7 kw/m)

Specifications

Key Specs

Blade spacing 25.4 cm
10 in.
Horsepower per ft 10.4 kW or more
14 hp or more
Operating speed 16.1 to 22.5 km/h
10 to 14 mph
Transport height 3.07 m
10.08 ft
Transport width 3.83 m
12.58 ft
Working depth 5.1 to 15.2 cm
2 to 6 in.
Working width 3.56 m
11.67 ft
  • Wide range of working widths available to match acreage and power requirements
  • Simple depth control and limited maintenance
  • Rear attachment options to match the operation
  • Individually mounted blades
Features

Features

  • Residue Conditions: Easy to set shims
  • Weight /blade: light/medium/heavy
  • Models: 2-6 inches (51-152 mm)
  • Required HP (Engine)/FT: A210 - 380 lbs (95.25-172.4 kg)*
  • Working Depth: 10 to 14 mph (16-22.5 km/h)
  • Working Speed: 11-15/ft. (26.9-36.7 kw/m)
Specifications

Specifications

Key Specs - Blade spacing:
25.4 cm<br/>10 in.
Key Specs - Horsepower per ft:
10.4 kW or more<br/>14 hp or more
Key Specs - Operating speed:
16.1 to 22.5 km/h<br/>10 to 14 mph
Key Specs - Transport height:
3.07 m<br/>10.08 ft
Key Specs - Transport width:
3.83 m<br/>12.58 ft
Key Specs - Working depth:
5.1 to 15.2 cm<br/>2 to 6 in.
Key Specs - Working width:
3.56 m<br/>11.67 ft
Machine - Blade size:
50.8 cm<br/>20 in.
Machine - Blade spacing:
25.4 cm<br/>10 in.
Machine - Horsepower per ft:
10.4 kW or more<br/>14 hp or more
Machine - Operating speed:
16.1 to 22.5 km/h<br/>10 to 14 mph
Machine - Purpose:
Primary/Secondary
Machine - Transport height:
3.07 m<br/>10.08 ft
Machine - Transport width:
3.83 m<br/>12.58 ft
Machine - Weight per blade:
137 kg<br/>302 lb
Machine - Working depth:
5.1 to 15.2 cm<br/>2 to 6 in.
Machine - Working width:
3.56 m<br/>11.67 ft
Number of blades - Front blades:
14
Number of blades - Rear blades:
14
Number of blades - Total:
28

Key Specs

Blade spacing 25.4 cm
10 in.
Horsepower per ft 10.4 kW or more
14 hp or more
Operating speed 16.1 to 22.5 km/h
10 to 14 mph
Transport height 3.07 m
10.08 ft
Transport width 3.83 m
12.58 ft
Working depth 5.1 to 15.2 cm
2 to 6 in.
Working width 3.56 m
11.67 ft
Details

Wide range of working widths available to match acreage and power requirements

Integral three-point rigid machineIntegral three-point rigid machine
Three-section drawn machineThree-section drawn machine

The 2680H High-Performance Disk gives operators the ability to cover acres quickly, increasing their productivity. This two-season tool can operate up to 22.5 km/h (14 mph) in field.

 

This tool is available in fifteen configurations from 2.4 m to 13.7 m (8 ft to 45 ft). The 2680H requires 34.25 kW/m (14 hp/ft), but in certain hilly, soft or wet conditions it may require an additional 25% engine horsepower to maintain operating speeds at preferred working depth.

Integral three-point rigid models
Working widthProductivity per hour at 18.5 km/h (11.5 mph)*
2.5 m (8 ft, 4 in.)4.7 ha (11.6 acres)
3.05 m (10 ft)5.6 ha (13.9 acres)
3.6 m (11 ft, 8 in.)6.6 ha (16.3 acres)

 

One-section drawn models
Working widthProductivity per hour at 18.5 km/h (11.5 mph)*
2.5 m (8 ft, 4 in.)4.7 ha (11.6 acres)
3.05 m (10 ft)5.6 ha (13.9 acres)
3.6 m (11 ft, 8 in.)6.6 ha (16.3 acres)

 

Two-section drawn models
Working widthProductivity per hour at 18.5 km/h (11.5 mph)*
4.85 m (15 ft, 11 in.)9.0 ha (22.2 acres)
5.4 m (17 ft, 7 in.)9.8 ha (24.3 acres)
6.4 m (20 ft, 11 in.)11.8 ha (29.2 acres)
7.4 m (24 ft, 4 in.)13.7 ha (33.9 acres)
Three-section drawn models
Working widthProductivity per hour at 18.5 km/h (11.5 mph)*
7.6 m (25 ft)14.1 ha (34.8 acres)
9.1 m (30 ft)16.9 ha (41.8 acres)
10.7 m (35 ft)19.7 ha (48.8 acres)
12.2 m (40 ft)22.6 ha (55.8 acres)
13.7 m (45 ft)25.4 ha (62.7 acres)

 

*NOTE: Minimum overlap of 15.2 cm (6 in.).

Simple depth control and limited maintenance

Shim system for depth controlShim system for depth control

Depth control is easy to set on the 2680H High-Performance Disk. The 2680H utilizes a shim system to control depth. Each shim is 1.3-cm (1/2-in.) wide. Simply remove the pin, raise or lower the number of shims needed to reach the desired depth, and replace the pin.

 

The 2680H also features greaseless bushings and bearings, allowing operators to get into the field faster without extensive daily maintenance.

Rear attachment options to match the operation

Cage rollerCage roller
Spring rollerSpring roller
Rubber rollerRubber roller

Producers can choose from three rear attachment options to match their operation. Options include a cage roller, spring roller, and rubber roller.

 

The cage roller is best for breaking up clods. Choose this rear attachment if the primary application is fall tillage. It is best in light to medium soils and has a diameter of 64.8 cm (25.5 in.).

 

The spring roller is best for medium soils and can provide a level seedbed with additional firming. Individually mounted tines work to prevent plugging of the roller. It has a diameter of 62.2 cm (24.5 in.).

 

The rubber roller is best for firming and preparing a seedbed in the spring. This rear attachment works in most soil types and features a hydraulically adjustable scraper. It has a diameter of 63.5 cm (25 in.).

Individually mounted blades

Individually mounted bladesIndividually mounted blades
Rubber torsion elementsRubber torsion elements

The 2680H High-Performance Disk features individually mounted blades. These blades, supported by rubber torsion elements, can travel up to 22.9 cm (9 in.) while passing over an obstruction, like a rock. This allows the rest of the tool to remain engaged and continue working, allowing for better ground contour.

#

To also follow ground contour, wings on the three-section machines flex to stay engaged on hilly or terraced ground.

Wings follow the ground contourWings follow the ground contour

Blades are also easy to replace. Rather than having to remove an entire gang, just replace an individual blade.

  • Wide range of working widths available to match acreage and power requirements
  • Simple depth control and limited maintenance
  • Rear attachment options to match the operation
  • Individually mounted blades

Other Disks Models

×