- Easy-to-maneuver
- Adjustable cutting height
- Balanced blade pan
- Puncture-resistant rear tires
Reversible hitch accommodates many types of tractor hookups
The lower hitching point on the RC20 Series Rotary Cutter accommodates a reversible front hitch for smaller or older tractors.
Balanced blade pan reduces vibrations
There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration.
The blade bar is thicker for added durability.
Lower lip (Z-profile) increases durability and strength
The RC20 Series Rotary Cutters have a lower lip (Z-profile), which extends from the skid shoes to where the apron opens up. This Z-profile increases the overall durability and strength of the rotary cutter.
Puncture-resistant rear tires
Choose a laminated or solid rubber rear tire for the RC20 Series Rotary Cutter. Both are puncture resistant.
The laminated tire is longer lasting and provides more support when working in sandy or lighter soil conditions.
iMatch™ hitch system provides quick and easy connections
The iMatch hitch system converts a tractor’s 3-point hitch to fixed hooks and attaching points for a super-quick connection (the iMatch hitch is sold separately).
Deck deflectors offered in chain or rubber
The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.
These deflectors are available in:
- Rubber or chain on the front
- Metal or chain on the rear
Adjustable cutting height
Adjusting the cutting height is easy. Along with adjusting a tractor’s three-point linkage, simply move the support bar to the desired cutting height.
The RC20 Series Rotary Cutters go as low as 3.8 cm (1.5 in.) or as high as 22.9 cm (9 in.).
Easy-to-maneuver deck
The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.
Blade holder - Diameter: | 567 mm 22.3 in. |
---|---|
Driveline - Type: | Shear bolt or slip clutch |
Wheels - Width laminated: | 95 mm 3.75 in. |
Dimensions - Overall length: | 220 cm 87 in. |
Hitch - Category: | Cat. 1, adaptable to Cat. 2 |
Tractor compatibility - Tractor PTO: | 540 rpm |
Deck - Shape: | Flat-open round back |
Blades - Tip speed: | 66.5) m/s 13,090 fpm |
Blades - Thickness: | 13 mm 0.5 in. |
Blades - Width: | 76 mm 3 in. |
Hitch - AutoHitch? compatible: | Yes |
Wheels - Diameter rubber: | 381 mm 15 in. |
Gear case - Horsepower: | 34 kW 45 hp |
Warranty - Gearbox: | 1 year |
Hitch - iMatch? compatible: | Yes |
Weight - Operating: | 232 kg 512 lb |
Capacity - Cutting height: | 4-23 cm 1.5-9 in. |
Capacity - Cutting chamber depth: | 19 cm 7.5 in. |
Wheels - Type: | Solid rubber or laminated |
Blade holder - Type: | Round pan-type |
Set-up time - Labor hours: | 1 |
Warranty - Time period: | 1 year |
Capacity - Cutting width: | 122 cm 48 in. |
Skirt - Thickness: | 11 gauge 3 mm 0.12 |
Capacity - Cutting diameter: | 0-2.5 cm 0-1 in. |
Blades - Type: | Heat treated, suction |
Tractor compatibility - PTO horsepower: | 13-33 kW 18-45 hp |
Deck - Type: | Single |
Hitch - Type: | Lift-type |
Safety - Markings: | Standard |
Wheels - Width rubber: | 95 mm 3.75 in. |
Wheels - Diameter laminated: | 381 mm 15 in. |
Dimensions - Overall width: | 129 cm 51 in. |
Safety - Front deflector: | Standard |
Wheels - Quantity: | 1 |
Tractor compatibility - PTO category: | ASAE 3 |
Deck - Thickness: | 11 gauge 3 mm 0.12 |
Safety - Rear deflector: | Standard |
- Hitch Category: Cat. 1 & Cat.2
- Working Width: 48 in. (121.9 cm)
- PTO HP: 18 – 45 hp (13.4 – 33.6 kW)