John Deere

6120E Utility Tractor

Manufacturer: John Deere
Model: 6120E Utility Tractor
  • Engine HP: 122 Max | 120 Rated
  • John Deere FT4 PowerTech™ engine combines performance and fluid economy
  • 12/12 or 24/12 hi-lo PowrReverser™ transmission
  • Cab, open station, 2WD or MFWD
  • 15 degrees of seat swivel with optional air-ride seat

Enhanced visibility with premium light kit

Premium light kit on 6120EH Tractor
Premium light kit on 6120EH Tractor

To further enhance visibility, the 6120EH Tractor has the option to include light-emitting diode (LED) lights. With LED lights on the front hood and cab of the tractor, performing tasks in variable operating conditions is made easier. Operators can do any operation, such as apply chemicals, in low light conditions.

 

Benefits:

  • Visibility
  • Productivity
  • Comfort

Tire combinations; two-wheel drive (2WD), mechanical front-wheel drive (MFWD) and rear axle – radial tires

Overview

Front and rear radial tire offerings are available on all models, except for the front tires on the open-operator station (OOS) configurations.

6E with radial tire offering
6E with radial tire offering
Benefits
  • Better ride quality
  • Better wear characteristics
  • Less compaction
  • More efficient converting more power to the ground
  • Heavy-duty front rims are also available that are capable of additional load and are perfect for roadside mowing or sidehill applications
Additional details

Tire combinations by model

 

Codes 6105E 6120E 6120EH 6135E
2WD front
6151 10.00-16 in. 8PR F2 bias X X
2WD rear
5212 460/85R34 in. 8PR R1W radial X X
5225 420/85/R38 in. 8PR R1W radial X X X
5234 460/85R38 in. 8PR R1W radial X X X
Mechanical front-wheel drive (MFWD) front
6210 340/85R24 in. 8PR R1W radial X X X
6200 320/85R24 R1W radial X X X
6217 320/85R32 R1W X X X
6218 340/85R24 R1W heavy-duty rim X X X
6220 380/85R24 in. 8PR R1W radial X X X
6222 380/85R24 R1W heavy-duty rim X X X
6212 320/90R46 in 148A8 R2 radial X
6213 320/90R50 in 147A8 R1W radial X
6214 340/85R38 R2 radial X
6295 230/95R48 in TL R1W radial X
MFWD rear
5212 460/85R34 in. 8PR R1W radial X X X
5225 420/85/R38 in. 8PR R1W radial X X X
5234 460/85R38 in. 8PR R1W radial X X X
5460 300/95R42 TL R1, 147A8 radial X X X
5521 320/90R50 R1W radial X X X X
5223 320/90R46 in 148A8 R2 radial X
5567 340/85R38 R2 Radial X
5295 230/95R48 In. TL R1W Radial X

Reduce downtime with John Deere Connected Support™ technology and JDLink™ system

When producers buy John Deere equipment, they expect reliability. They also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert the producer and dealer promptly – in the cab or anywhere they are.

 

John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to the machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.

Decrease interruptions to work with John Deere Connected Support
Decrease interruptions to work with John Deere Connected Support

With permission, John Deere Connected Support:

  • Keeps operators running by monitoring machine health and promptly alerting the producer and dealer of issues
  • Saves time by remotely viewing in-cab displays, reducing trips to the machine
  • Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
  • Connects experts with the information needed to respond to downtime faster and prevent it altogether

 

With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep producers running as John Deere and John Deere dealers can.

Customized accuracy and repeatability with John Deere StarFire™ 6000 Receiver

StarFire 6000 Receiver on the 6120EH Tractor
StarFire 6000 Receiver on the 6120EH Tractor

6120EH Tractors come with the option to include the John Deere StarFire 6000 Receiver. The StarFire 6000 Receiver expands on the value that precision agriculture growers have come to expect from StarFire products. The StarFire 6000 Receiver is equipped with an antenna, the latest in Global Navigation Satellite System (GNSS) signal processing technology, and a differential correction signal. This technology adds up to improved performance and uptime as well as lowers the cost of operation when paired with precision agriculture systems such as the AutoTrac™ assisted steering system.

 

Benefits:

  • Customize accuracy
  • Repeatability to meet the needs of the operation
  • Get started faster with improved pull-in performance
  • Maximize uptime to keep the job moving

Efficient and improved performance with G5 Universal Display and AutoTrac™ automated steering

G5 display in the tractor cab
G5 display in the tractor cab

The G5 Universal Display and AutoTrac activation leverages the simple modern interface offered with the G5 family of displays. With a G5 display, the StarFire™ 6000 Receiver determines the level of AutoTrac system accuracy. The G5 AutoTrac activation for 6120EH Tractors supports SF3 and RTK.

Benefits:

  • Extensive tracking options with AutoTrac
  • Advanced guidance line creation and operation
  • Informed operators

Make machine maintenance easy using tools in Operations Center

Maintaining your equipment is easy with Maintenance in John Deere Operations Center web.

  • View current and past due maintenance with Maintenance in Operations Center web or in JDLink Mobile
  • Use factory plans or create a custom plan for each machine
  • View parts required for each interval
  • Link to John Deere Parts to order parts
Maintenance in John Deere Operations Center web helps you manage maintenance for your equipment
Maintenance in John Deere Operations Center web helps you manage maintenance for your equipment
Add plans to non-telematic machines in Maintenance
Add plans to non-telematic machines in Maintenance
Use Terminals to add non-telematic machines to your organization
Use Terminals to add non-telematic machines to your organization
Use JDLink Mobile to view and edit maintenance plans
Use JDLink Mobile to view and edit maintenance plans
Select “Order Parts” to be directed to John Deere Parts and have the parts placed into your cart
Select “Order Parts” to be directed to John Deere Parts and have the parts placed into your cart

Ground clearance and tread settings protect crops throughout various applications

High ground clearance protects crops
High ground clearance protects crops
Overview

High-value crop applications require the ability to pull implements and perform harvesting operations over rows of varying widths without damaging the crop. The 6120EH High-Crop Tractor delivers 77-cm (30-in.) of drawbar  ground clearance to protect the plants and roots during applications such as cultivating, spraying, transplanting, and harvest.

Benefits
  • Protection for crop plants and roots
  • Additional crop clearance
  • Adjustable tread for variable row spacing
Additional details

The 6120EH Tractor offers front and rear radial tire options similar to the current 6E Tractor lineup. This tire design provides better ride quality, less compaction, and efficiency converting power to the ground. The tire options available on the 6120EH are further designed to protect high-value crop operations by providing drawbar ground clearance from 63.5 cm to 76.2 cm (25 in. to 30 in.).

 

Front and rear tire size options include:

  • 340/85R38 R2 Radial
  • 230/95R48 R1W Radial
  • 320/90R46 R2 Radial
  • 320/90R50 R1W Radial
Tread spacing on 6EH Tractor
Tread spacing on 6EH Tractor

The tire tread can be set for premium utilization in operations with a variety of crop row spacing. The drop axle features a flanged-type axle end that supports main tread setting options from 183 cm to 213 cm (72 in. to 84 in.). This design assists in keeping the inner area of the wheels clear to avoid damaging the crops.

 

Crop row spacing Tractor tread spacing
91 cm (36 in.) 183 cm (72 in.)
97 cm (38 in.) 193 cm (76 in.)
102 cm (40 in.) 203 cm (80 in.)
107 cm (42 in.) 213 cm (84 in.)

12 forward/12 reverse (12F/12R), 12F/12R with creeper, and 24F/12R PowrReverser™ transmissions

Overview

The 6E Series PowrReverser transmissions deliver unmatched performance. This transmission is ideal for working in tight areas where forward to reverse shifting is a primary occurrence such as in barns, feedlots, and loader applications.

 

Producers who operate power take-off (PTO) implements like a rotary cutter or baler will appreciate the additional working speeds with the 24F/12R PowrReverser transmission. High and low buttons are used to make fine adjustments in speed without needing to use the clutch, delivering improved productivity.

 

The PowrReverser transmission provides 12 forward and 12 reverse speeds. Six well-spaced ground speeds place the operator in the important haying or rotary cutter range of 8 km/h to 20.9 km/h (5 mph to 13 mph). With this transmission, the operator can reach a top speed of 31.5 km/h (19.6 mph). The optional 24F/12R PowrReverser transmission delivers 11 well-spaced ground speeds to match the correct speed for a haying or rotary cutter application with a top speed of 40 km/h (25 mph).

 

A dash-mounted PowrReverser modulation kit (LVB25727) is available to set the aggressiveness of the forward and reverse shuttle modulation that best fits the application or the operator’s comfort level.

Operator controls
Right-side controls
Right-side controls
Left-side controls
Left-side controls

Two levers, one for speed and one for range, with the addition of an electrohydraulic left-hand reverser, provide operators optimum control and maneuverability.

  1. Range lever (right-hand side [cab], left-hand side [OOS]) selects four ranges (A, B, C, D).
  2. Gear selection (right-hand side) selects speeds (1, 2, or 3) in the forward or reverse
  3. Electrohydraulic left-hand reverser allows for quick and convenient shuttle shifting between forward and reverse at any
  4. High and low buttons are located on the gear shifter for the 24F/12R PowrReverser
  5. 12F/12R creeper transmission speed control (left-hand side)

 

Benefits

Forward and reverse speeds

All speed gears (1, 2, 3) are fully synchronized for shifting-on-the-go capabilities, putting less wear on the operator and saving time in the field. In the 12F/12R PowrReverser transmission, gears are synchronized for low shifting effort while the operator is doing field or loader work and during transport.

 

The PowrReverser transmission lineup also consists of a 12F/12R transmission with creeper. The creeper transmission functionality provides an ultra-low speed to match ground speed during tasks such as harvesting high-value crops, particularly vegetables, that are hand harvested.

 

The high and low speeds on the 24F/12R PowrReverser transmission can be shifted without clutching while the tractor is under load. This makes for quick speed changes when operating a rotary cutter or baler.

 

To further enhance awareness of reverse tractor motion, a backup alarm can be field installed (BSJ10026).

 

The ranges (A, B) are not synchronized. This means the tractor must be stopped for the operator to select the range. However, with operator input, the speeds have been well spaced out to minimize the need to change ranges within applications. The ranges (B to C, C to D, and D to C) are synchronized. That allows the operator to shift ranges on the go in transport and high-speed applications like operating a mower-conditioner.

 

Wet clutch

John Deere has led the industry in the innovation of wet clutches. In this wet-clutch design, five 17-cm (6.7-in.) diameter clutch disks provide optimum clutch modulation for smooth operation; the disks are oil-cooled for a lifetime of service.

 

The biggest advantage of a wet clutch is its ease of use as the required force to depress the pedal is minimal. Also, with a wet clutch, the need for frequent adjustment and clutch mechanism changeover is eliminated.

4.5L (275-cu in.) PowerTech™ engine power and specifications

Tractor models and horsepower
PowerTech engine
PowerTech engine
Overview

All John Deere 6E Series Tractors feature the reliable and proven 4.5L (275-cu in.) engines. These engines deliver constant power over a wide range of rpm with a power bulge above rated power and excellent torque characteristics.

The 6E Series, while being value-featured and competitively priced, are built with John Deere’s long-standing reputation for reliability, durability, and maintainability.

Model Displacement Rated power take-off (PTO) power

2100 rpm

Rated engine power

97/68/EC standard

6105E 4.5 L (275 cu in.) 66 kW (89 hp) 77 kW (105 hp)
6120E(H) 4.5 L (275 cu in.) 76 kW (102 hp) 88 kW (120 hp)
6135E 4.5 L (275 cu in.) 86 kW (115 hp) 99 kW (135 hp)

 

Rated engine horsepower ratings are included for reference to competitor’s gross or engine-only power ratings. There are several ratings systems used by other manufacturers. John Deere uses the horsepower-rating standard 97/68/EC, which is widely used in Europe for various regulations.

 

How is engine-only rated and maximum power determined?

John Deere engineering uses a precise procedure to measure engine-only power levels. The 97/68/EC standard is required in the European Union (EU) as an emission test, so there is some relation to the power a tractor has as a whole functioning unit; however, the procedure requires only that a production engine and radiator are used on a dynamometer test. Use the 97/68/EC horsepower ratings in the above chart to compare to competitor claims of engine-only power.

 

Benefits of PTO power and power bulge

 

The John Deere exclusive single-injector control, electronic fuel injection system, and other key engine parts work together to sense engine load and instantly respond as needed to pull through tough spots. This reduces engine rpm fluctuation, resulting in the reduced need to downshift the transmission. Fewer shifts result in fewer ground variations, providing more overall tractor productivity.

 

To match the engine power characteristics and improve economy of operation, the rated engine speed is 2200 rpm.

Feature and benefit overview

High-pressure common rail fuel system

  • Higher injection pressures (up to 1896 bar [27,500 psi]), precise variable injection pressure, variable timing control, multiple injections

Four-valve cylinder head

  • Crossflow head design provides excellent breathing from a lower-cost four-valve cylinder head.

Turbocharged

  • In turbocharged engines, the air is pre-compressed. Due to the higher pressure, more air is supplied into the combustion chamber, allowing a corresponding increase in fuel injection which results in greater engine output.

Turbochargers

  • Precisely matched to the power level and application, the 6Es are equipped with a wastegate (to divert exhaust gases) turbo.

Air-to-air intercooling

  • This is most efficient method of cooling intake air to help reduce engine emissions while maintaining low speed torque, transient response time, and peak torque. It enables the engine to meet emission requirements with better fuel economy and the lowest installed costs.

Compact size

  • 4.5 L (275 cu in.), 4 cylinders

Engine performance

  • Power bulge feature
  • Increased low-speed torque
  • Multiple rated speeds to further reduce noise and improve fuel economy
  • Higher peak torque ratings
  • Faster torque rise

John Deere electronic engine controls

  • Monitors critical engine functions providing warning and/or shutdown to prevent costly engine repairs; eliminates need for add-on governing components; all lowering total installed costs
  • Snapshot diagnostic data that can be retrieved using commonly available diagnostic service tools
  • Common wiring interface connector for vehicles or available OEM instrumentation packages; solid conduit and T-connectors to reduce wiring stress and improved durability and appearance
  • Factory-installed engine-mounted engine control unit (ECU), wiring harness, and associated components; industry standard SAE J1939 interface which communicates with other vehicle systems, eliminating redundant sensors and reducing vehicle total installed cost

Additional features

  • Self-adjusting, poly v-fan drive
  • Forged-steel connecting rods
  • Replaceable wet-type cylinder liners
  • 500-hour oil change

Details:

Engine performance

Model 6105E 6120E(H) 6135E
Environmental Protection Agency (EPA) tier level Final Tier 4 (FT4) FT4 FT4
Engine model 4045H 4045H 4045H
97/68/EC at rated speed 77 kW (105 hp) 88 kW (120 hp) 99 kW (135 hp)
Rated engine speed 2200 rpm 2200 rpm 2200 rpm
PTO operating speed 2100 rpm 2100 rpm 2100 rpm
Maximum torque engine speed 1600 rpm 1600 rpm 1600 rpm
Fast idle speed 2275+10 rpm 2275+10 rpm 2275+10 rpm
Low idle speed 900+10 rpm 900+10 rpm 900+10 rpm
Torque curves
6135E torque curves graph
6135E torque curves graph
6120E(H) torque curves graph
6120E(H) torque curves graph
6105E torque curves graph
6105E torque curves graph
Engine specifications
Model 6105E 6120E(H) 6135E
Engine PowerTech PWL PowerTech PWL PowerTech PWS
Engine model 4045H 4045H 4045H
Size 4.5 L (275 cu in.) 4.5 L (275 cu in.) 4.5 L (275 cu in.)
Number of cylinders 4 4 4
Valves per cylinder 4 4 4
Aspiration Turbo and aftercooled Turbo and aftercooled Turbo and aftercooled
Engine management Electronic Electronic Electronic
Fuel delivery High-pressure common rail (HPCR) HPCR HPCR
Rated engine speed 2200 rpm 2200 rpm 2200 rpm
PTO operating speed 2100 rpm 2100 rpm 2100 rpm
Maximum torque operating speed 1600 rpm 1600 rpm 1600 rpm
Fast idle speed 2275 rpm 2275 rpm 2275 rpm
Low idle speed 900 rpm 900 rpm 900 rpm
Rated PTO power 66 kW (89 hp) at 2100 rpm 76 kW (102 hp) at 2100 rpm 86 kW (115 hp) at 2100 rpm
Rated engine power 77 kW (105 hp) at 2200 rpm [97/68/EC] 88 kW (120 hp) at 2200 rpm [97/68/EC] 99 kW (135 hp) at 2200 rpm [97/68/EC]
Power bulge 3 percent at 2000 rpm 3 percent at 2000 rpm 3 percent at 2000 rpm
Peak torque 432 Nm (318 lb-ft) at 1600 rpm 494 Nm (364 lb-ft) at 1600 rpm 538 Nm (397 lb-ft) at 1600 rpm
Torque rise 29 percent at 2200 29 percent at 2200 25 percent at 2200
Compression 16.8:1 16.8:1 16.8:1
Bore x stroke 11.9 x 12.7 cm (4.7 x 5 in.) 11.9 x 12.7 cm (4.7 x 5 in.) 11.9 x 12.7 cm (4.7 x 5 in.)

 

John Deere Connected Support™ prevents downtime and efficiently resolves issues with revolutionary technology-based solutions

Connected Support technology
Connected Support technology

When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.

John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.

With your permission, John Deere Connected Support:

  • Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
  • Saves time by remotely viewing in-cab displays, reducing trips to the machine
  • Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
  • Connects experts with the information needed to respond to downtime faster and prevent it altogether

With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.

Operate at ultra-slow speeds with the 12F/12R PowrReverser™ transmission with creeper

6EH Tractor operating in the field
6EH Tractor operating in the field

The 6E Series PowrReverser transmissions deliver unmatched performance. Operators who utilize power take-off (PTO) implements during high-value crop operations like harvesting and spraying will appreciate the range of working speeds provided by the PowrReverser transmission.

 

The 12F/12R PowrReverser transmission with creeper provides an additional ultra-slow speed and is conveniently managed on the left-hand side of the operator seat. The creeper feature benefits specialty applications such as vegetable and fruit farms that require ultra-slow speeds. The creeper transmission allows for speeds as low as 0.23 km/h (0.14 mph) to accommodate hand harvesting operations.

 

Benefits:

  • Provides ultra-slow speed
  • Matched for human walking speeds
  • Ideal use for harvesting machines
Creeper control on 6120EH Tractor
Creeper control on 6120EH Tractor

Implement versatility with Category 2 3-point hitch

6EH Tractor pulling an implement with 3-point hitch
6EH Tractor pulling an implement with 3-point hitch

A Category 2 3-point hitch on the 6E High-Crop Tractor provides the lift capacity and versatility needed throughout operations. Hooking up implements is convenient with telescoping draft links and adjustable sway bars. The external cylinders provide for a hitch lift capacity of 3702 kg (8161.5 lb) at lift point and 3420 kg (7540 lb) at 610 mm (24 in.) behind the hitch-lift balls throughout the lifting range. These features make the 6120EH Tractor able to perform in a variety of different applications.

  • Pulling harvester wagons
  • High value crop harvesting
  • Spraying
  • Transplanting
  • Cultivating
6120EH Tractor with 3-point hitch and sway bars
6120EH Tractor with 3-point hitch and sway bars

Loader-ready packages

Overview

To further the versatility and efficiency of the 6E Tractors and their hydraulic capabilities, the 6Es (excluding 6120EH) can be ordered loader ready. Being able to add a loader to a 6E Tractor makes it an even more capable solution to the various tasks a utility tractor is challenged with.

Mechanical joystick with dual-function mid-mount valve
Joystick installed in cab tractor
Joystick installed in cab tractor

Overview:

For the operator wanting to install a loader on a tractor, two-function and three-function hydraulic mid-mount valves with mechanical joystick are available.

Benefits:

  • The operator can operate the loader using a joystick, increasing productivity and maneuverability
  • Available for both cab and open operator station (OOS) configurations on all 6Es (excluding 6120EH)
  • Quick installation of a loader once the tractor is received
  • Improved resale value

NOTE: To field install the single-function lever controls (both two and three function) please refer to the loader Sales Manual and Price Pages.

Engine specifications - Engine type: Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Hydraulic system - Number of rear selective control valves (SCVs): Standard: ISO Couplers: 2
Optional: ISO Couplers 3
Engine specifications - Description: John Deere PowerTech™ PWL (B20 Diesel Compatible)
Drawbar - Drawbar category: Standard: Category 2
Optional: Category 2 heavy duty
Key Specs - Rated PTO power (hp SAE): 76 kW
102 PTO hp
Rear hitch - Sensing type: Optional
Key Specs - Transmission type: Standard: John Deere 12F/12R PowrReverser™ Transmission: 30 km/h
19 mph
Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h
25 mph
Transmission - Type: Standard: John Deere 12F/12R PowrReverser™ Transmission: 30 km/h
19 mph
Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h
25 mph
Operator station - Instructional seat: Optional
Engine performance - Rated power: 97/68EC: 88 kW
120 engine hp
Serviceability - Interval for engine coolant change: 5,000 hours
Engine specifications - Emission level: Final Tier 4
Engine specifications - Displacement: 4.5 L
275 cu in.
Capacities - Crankcase oil volume: 15 L
4 U.S. gal.
Engine specifications - After treatment type: DOC/DPF/SCR
Dimensions - Wheelbase: 2WD: 2456 mm
96.7 in.
MFWD: 2450 mm
96.5 in.
Engine specifications - Engine family: HJDXL04.5315
Key Specs - Rated engine power: 97/68EC: 88 kW
120 engine hp
Rear power take-off (PTO) - Type: Independent
35 mm (1.375 in.) 540 rpm/1000 rpm reversible shaft
Rear hitch - Maximum lift capacity behind lift points: Standard: Category 2 with heavy duty lift: 3318 kg
7300 lb
Rear axle - Type: Flange
Key Specs - Engine description: John Deere PowerTech™ PWL (B20 Diesel Compatible)
Hydraulic system - Available flow at a single rear SCV: 75.7 L/min
20 gpm
Serviceability - Interval for engine oil change: 500 hours
Drawbar - Maximum vertical load: Standard: Category 2 1000-1250 kg
2205-2756 lb
Optional: Category 2 heavy-duty: 1200-1900 kg
2645-4189 lb
Maximum vertical load dependent on drawbar position
Electrical system - Total cold cranking amps: 925 CCA
Operator station - Seat: Standard: Mechanical suspension cloth seat
Optional: Air suspension
Additional information - Date collected: 9-Feb-17
Rear power take-off (PTO) - Engine rpm (at rated PTO speeds): 2085 engine rpm at 540 rpm PTO
2067 engine rpm at 1000 rpm PTO
Engine performance - Engine peak torque: At 1,600 rpm: 494 Nm
364 lb-ft
Hydraulic system - SCV control: Mechanical
Engine performance - PTO torque rise: 30 percent
Front axle - Front axle differential lock: 2WD: None
MFWD: limited slip
Weight - Maximum ballast level: 6464 kg
14,250 lb
Dimensions - Approximate shipping weight, Open;Cab: 2WD Open: 4064 kg
8960 lb
MFWD: Open: 4268 kg
9410 lb
Cab: 4645 kg
10,240 lb
Key Specs - Engine displacement: 4.5 L
275 cu in.
Front axle - Type: Standard: MFWD
Optional: 2WD
Capacities - Transmission-hydraulic system: 58 L
15.3 U.S. gal.
Capacities - Cooling system: Open station: 18.6 L
4.7 U.S. gal.
Cab: 19.1 L
5 U.S. gal.
Engine specifications - Aspiration: Turbocharge, wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Engine specifications - Rated speed: 2200 rpm
Tires - Wheel tread range: 2WD: 1533-2043 mm
60.4-80.4 in.
MFWD: 1516-2016 mm
59.7-79.4 in.
Hydraulic system - Pump rated output: 36.5 cc pump: 75.7 L/min
20 gpm
Engine performance - Rated PTO power (hp SAE): 76 kW
102 PTO hp
Key Specs - Rear hitch category (SAE designation): Standard: Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 2: 3318 kg (7300) heavy duty lift at 610 mm behind hitchpoint
Rear hitch - Hitch category (SAE designation): Standard: Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 2: 3318 kg (7300) heavy duty lift at 610 mm behind hitchpoint
Electrical system - Battery options: 12 V
Hydraulic system - Type: Open-center
Gear Driven
Key Specs - Hydraulic pump rated output: 36.5 cc pump: 75.7 L/min
20 gpm
Miscellaneous - Country of manufacture: Mexico
Capacities - Fuel tank: 168 L
44.4 U.S. gal.
Electrical system - Alternator size: 90 amp
Steering - Type: Standard: Hydrostatic power
Serviceability - Interval for hydraulic/transmission oil change: 1,000 hours
Rear axle - Final drive type: Inboard planetary
Operator station - Display: LCD instrument cluster
Rear axle - Rear differential lock: Full-locking mechanical
  • Cab or Pen Station: Both
  • Hydraulics: Rated flow: 20 US gpm/75.7 lpm
  • PTO HP: Max: 102 hp (76 kW)
    Rated: 102 hp (76 kW)
  • Transmission: 12/12 or 24/12 hi-lo PowrReverser™
  • Engine HP¹: Max: 122 hp (91 kW)
    Rated: 120 hp (88 kW
  • Loader Compatibility: 540M or H310
Chris Vonholten

I felt like I had been doing business with Martin Tractor for years even though it was my first interaction with them.

Contact This Location