John Deere

6130M Utility Tractor

Manufacturer: John Deere
Model: 6130M Utility Tractor
  • Engine HP: 144 Max | 130 Rated
  • John Deere FT4 PowerTechâ„¢ engine combines performance and fluid economy
  • Transmission options: PQT, AQT, CQT, or IVT
  • Available in cab or open-station configuration
  • Standard 21-GPM pressure-compensated hydraulics; 30-GPM pressure-flow compensated system available

Increase versatility with a front hitch and front power take-off (PTO)

6120M with optional front hitch
6120M with optional front hitch

For all 6M Series Tractors, an optional integrated John Deere Category 3N front hitch with hook-end draft links can be factory installed. The high lift capacity of 4400 kg (9,700 lb) maximum and 3300 kg (7,275 lb) through the full lift range ensures compatibility with heavy front implements and ballasts. If the tractor is not equipped with Triple-Link Suspension (TLS™), an accumulator will be installed to ensure driving comfort. The front hitch allows:

  • Maximum uptime with quick and easy changing from folded to working position
  • The operator to be highly flexible with the front ballast
  • Optional availability of integrated front power take-off (PTO)
  • Counterclockwise rotating PTO (view from front)

Boost power and productivity in operations using Intelligent Power Management

6120M with Intelligent Power Management
6120M with Intelligent Power Management

The 6110M through 6140M Tractors come equipped with Intelligent Power Management (IPM). IPM provides a 14.9-kW (20-hp) boost for operations that use rear power take-off (PTO) in high-power applications or in transport. Benefits of IPM include improved productivity, increased acceleration, and the ability to maintain desired transport speeds. The requirements for IPM to be active include:

  • Transport applications: The minimum ground speed where additional power begins to be applied for all models is 15 km/h (9.3 mph), assuming the engine is already fully loaded. Ramp-up to full additional power occurs as speed continues to increase.
  • PTO activation: Power must be sensed going through the PTO drive clutch by the electronic system. When using PTO-driven implements, engine power is increased gradually when ground speed exceeds 1 km/h (0.6 mph) if the electronic system detects a correspondingly high PTO power requirement. Full power becomes available from a speed of 2.5 km/h (1.5 mph).

John Deere Connected Supportâ„¢ prevents downtime and efficiently resolves issues with revolutionary technology-based solutions

Connected Support technology
Connected Support technology

When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.

John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLinkâ„¢ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.

With your permission, John Deere Connected Support:

  • Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
  • Saves time by remotely viewing in-cab displays, reducing trips to the machine
  • Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
  • Connects experts with the information needed to respond to downtime faster and prevent it altogether

With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.

Ride in comfort with reimagined cab and premium options

6120M standard cab with Compact CommandARMâ„¢ console
6120M standard cab with Compact CommandARMâ„¢ console

There’s no denying you spend plenty of time in the cab. Make it quality time with the redesigned 6M Tractor cab. Guided by best-practice ergonomic principles and four different cab packages to customize the way you work, you’ll enjoy a more productive, comfortable, and efficient experience. All 6M Tractors will come standard with a digital cornerpost display, eliminating the previous instrument cluster behind the steering wheel. This easy-to-read digital display gives you access to all critical machine data and settings in one place. Additionally, premium options have been made available to let you customize your 6M to fit any operation including:

  • Mechanical or electrical reconfigurable joystick with PowrReverserâ„¢ functionality
    • Quickly and easily change directions with the push of a button while doing loader work
  • Compact CommandARMâ„¢ console
    • Swivel in your seat and have all the controls at your fingertips
  • Triple-Link Suspension (TLSTM)
    • Increase both transport and field productivity with superior stability, ride, and comfort with a suspended front axle
  • Mechanical cab suspension
  • Panoramic roof
Panoramic roof
Panoramic roof
Cornerpost display
Cornerpost display

Bluetooth is a trademark of Bluetooth SIG, Inc.

Stay connected to all machines from anywhere with JDLink™ system

John Deere 6120M with StarFireâ„¢ 6000 Receiver and tablet with JDLink
John Deere 6120M with StarFireâ„¢ 6000 Receiver and tablet with JDLink

Operators looking to remotely access critical machine data and manage their fleet in one place can with JDLink. JDLink is the telematics system from John Deere that connects all machines in the field with office and mobile devices. The technology is based on a Modular Telematics Gateway (MTG) controller that collects and transmits data via a cellular network using selective data points in near-real time. With JDLink, operators can:

  • Remotely view information from a computer, phone, or tablet
  • Access machine data like engine hours and fuel level
  • Track machine location and history
  • Set up and manage geofence and curfews
  • Manage maintenance plans and alerts
John Deere 6155M and 835 Mower Conditioner with StarFire 6000 Receiver and JDLink
John Deere 6155M and 835 Mower Conditioner with StarFire 6000 Receiver and JDLink

Improved access for serviceability with side panels and oil dipstick location

Removable side panels for easy access on 6120M
Removable side panels for easy access on 6120M
Side panels attached to the 6120M
Side panels attached to the 6120M

6M Series Tractors have been redesigned to meet stringent reliability and serviceability requirements. Daily service requirements have been reduced and are simple to accomplish with improved accessibility to the engine. All 6M models are equipped with a 60-degree hood, and the 6110M and 6120M feature removable side panels, allowing easy access to reduce time and make serviceability even easier.

 

These features allow you to quickly and easily check parts like:

  • Engine oil filter
  • Engine fuel filter
  • Coolant recovery tank
  • Air cleaner

 

Additionally, the oil dipstick on the 6110M and 6120M allows you to check the engine oil level without opening the hood.

Updated oil dipstick location on 6110M-6120M
Updated oil dipstick location on 6110M-6120M

Reduce fuel consumption with proven, easy-to-use IVT™ transmission

IVT transmission control handle on 6M Tractor
IVT transmission control handle on 6M Tractor

Operators looking for a more comfortable, fuel efficient, and proven transmission can upgrade to an Infinitely Variable Transmission (AutoPowrâ„¢/IVT) system for any 6110M through 6140M tractor. The IVT system utilizes a combination of mechanical and hydrostatic power, providing stepless and continuous power across an infinitely variable range of speeds.

 

The single-speed lever is used for intuitive and accurate control of ground speeds as slow as 0.05 km/h (0.03 mph) to 40 km/h (25 mph). The wheel is quick and easy to adjust with the operator’s thumb to set the maximum commanded forward or reverse speed in each speed band. Operators can also enjoy reduced fuel costs and a quieter, more comfortable ride with transport speeds being reached at lower engine rpms. Additional benefits include:

  • Easy to operate
  • Less shifting time for better management of implements
  • Precise management of speeds
  • Under acceleration, engine rpm is kept to a minimum within the engines peak torque band to reduce noise and fuel consumption

Easy implement control using rear-mounted selective control valves (SCVs)

Optional electrical control valves (E-SCVs)
Optional electrical control valves (E-SCVs)

All 6M models come with the option to upgrade from mechanical to electronically controlled SCVs. To control a rear implement, up to four electrical SCVs or three electrical SCVs plus power beyond can be ordered. Each SCV features four positions – neutral, raise, lower, and float. The electrical SCVs are fully adjustable with the digital cornerpost display. Additionally, you can choose what SCVs are right for your operation with the following combinations of SCVs:

With Compact CommandARMâ„¢ console:

  • Up to four electrical SCVs possible or three plus power beyond
  • Loader packages with electrical joystick available
  • Mechanical SCVs are not available

With right-hand console:

  • Up to three mechanical SCVs possible plus power beyond
  • Up to four electrical SCVs possible or three plus power beyond
  • Combination of two electrical and one or two mechanical SCVs available
  • Loader packages with maximum of three mechanical SCVs available
  • Loader packages with electrical joystick available

Increase visibility and productivity with light packages

6155M with Premium light-emitting diode (LED) light package
6155M with Premium light-emitting diode (LED) light package

Lights on the 6M Series Tractors have been positioned and designed to provide maximum visibility to the front, sides, and rear to increase productivity in any operating conditions. The updated cab lighting pattern provides 330 degrees of coverage while the hood lighting provides the remaining 30 degrees. You have two options to upgrade lighting with the Economy and Premium light packages available:

  • Economy light package
    • Two additional work lights in the front, side, and rear
  • Premium light package
    • Two additional work lights in the front, side, and rear
    • All lights are LED lights

 

Both packages require the 14-V/150-amp alternator (code 8741) and 12-V/174-amp-hr battery (code 8747).

Focus more on the job and less on steering with AutoTrac™ guidance on the cornerpost display

AutoTrac on cornerpost display
AutoTrac on cornerpost display

If you are looking for a low-cost integrated guidance system, 6M Tractors come equipped with AutoTrac guidance using the digital cornerpost display. For this straight track only feature, you no longer need an additional display or activation. To utilize AutoTrac on the cornerpost display, simply order your 6M Tractor as AutoTrac Ready (code 1758) and install a StarFireâ„¢ 6000 Receiver. While AutoTrac makes straight passes, you can focus more on job quality and leave the field less fatigued after a long day of mowing, spraying, or other field work.

 

Benefits of AutoTrac on the cornerpost display include:

  • Easy to access, setup, and initiate
  • Eliminate implement overlap and optimize machine efficiency
  • Reduce operator fatigue
  • Less cost than adding an additional display and activation

 

If you need more capabilities, like different track types or documentation, John Deere also offers a G5 Universal Display. These displays enable AutoTrac guidance that provides enhanced usability, increased performance, and greater operator choice. Additional benefits include:

  • On-screen mapping
  • Documentation
  • Section Control

Note: AutoTrac guidance on the cornerpost is not compatible with the StarFireâ„¢ 3000 Receiver.

Key Specs - Maximum PTO power: At 1000 PTO rpm with IPM: 93 kW
127 hp
Transmission - Reverser: Electronic left-hand reverser
Engine specifications - Displacement: 4.5 L
275 cu in.
Key Specs - Rated engine power: 96 kW
130 hp
w/ IPM: 110 kW
150 hp
Hydraulic system - Type: Standard: Pressure compensated (PC)
Optional: Pressure-and-flow compensated (PFC) system with Load Sensing function
Serviceability - Interval for hydraulic/transmission oil change: 1500 hours
Front axle - Type: Standard: MFWD
Optional: Two-wheel drive (2WD)
Triple-Link Suspension (TLS) MFWD axle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range)
Triple-Link Suspension MFWD with brakes
Rear axle - Final drive type: Three planetary gear reduction
Capacities - Cooling system: 22 L
5.8 U.S. gal.
Key Specs - Engine displacement: 4.5 L
275 cu in.
Engine performance - Rated power: 96 kW
130 hp
w/ IPM: 110 kW
150 hp
Engine performance - Engine peak torque: At 1600 U/min: 609 Nm
449.17 lb-ft
Key Specs - Base machine weight: 5800 kg
12,786 lb
Hydraulic system - Joystick SCV control: Mechanical/electrical
Rear hitch - Sensing type: Electronic lower link
Operator station - Rollover protective structure, OOS: Gearshift location - console/floor
Console
Operator station - Display: Cornerpost display (right-hand A-post)
Functionality: Performance monitor and individual settings
Key Specs - Engine description: John Deere PowerTechâ„¢ PSS
Key Specs - Maximum engine power: 106 kW
144 hp
w/ IPM: 115 kW
156 hp
Electrical system - Alternator size: Standard: 14 V/120 amp
Optional: 14 V/150 amp
14 V/200 amp
Front hitch - Category: 3N
Engine specifications - Description: John Deere PowerTechâ„¢ PSS
Front axle - Front axle differential lock: Self-locking differential
Transmission - Creeper: Optional
Engine specifications - Aspiration: Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Dimensions - Overall width: 2490 mm
98.03 in.
Rear power take-off (PTO) - PTO actuation: In-cab switch and external fender-mounted remote control
Engine performance - Maximum PTO power: At 1000 PTO rpm with IPM: 93 kW
127 hp
Operator station - Cab glass area: Without roof hatch or panoramic roof: 4.85 m2
52.2 sq ft
Dimensions - Wheelbase: 2580 mm
101.6 in.
Steering - Type: Dynamic load sensing, hydrostatic, flow metering
Capacities - Fuel tank: 195 L
51.5 U.S. gal.
Engine specifications - Engine type: 4045HL555
Rear axle - Rear differential lock: Electrohydraulically with oil-cooled clutch
Operator station - Inner cab volume: 2.73 m3
96.41 cu ft
Key Specs - Rear hitch category (SAE designation): 2/3N
Engine performance - PTO torque rise: 40 percent
Rear axle - Type: Standard: Flange-type rear axle
Optional: Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft (2.556-m/8.4-ft length)
Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft - short version (2.286-m/7.5-ft length)
Electrical system - Battery options: Standard: 12 V/154 amp-hr
Optional: 12 V/174 amp-hr
Engine performance - Power boost: 10 percent
Hydraulic system - Pump rated output: Standard: 35-cc pump: 80 L/min
21 gpm
Optional: 45-cc pump: 114 L/min
30 gpm
Loaders - Loader: 640R
Engine specifications - Engine family: JDXL06.8324
Weight - Base machine weight: Front axle
2150 kg
4739 lb
Rear axle
3650 kg
8047 lb
5800 kg
12,786 lb
Loaders - Maximum lift height: NSL/MSL: 4.141 m
163.03 in.
Front hitch - Standard lift capacity: 4400 kg
9700.3 lb
Capacities - Transmission-hydraulic system: PowrQuad Plus/AutoQuad Plus: 60 L
15.9 U.S. gal.
Key Specs - Rated PTO power (hp SAE): 74 kW
101 hp
Serviceability - Interval for engine oil change: 500 hours
Capacities - Diesel exhaust fluid (DEF) tank: 13 L
3.4 U.S. gal.
Hydraulic system - Number of rear selective control valves (SCVs): Standard: Two ISO couplers
Optional: Two to four ISO couplers
Dimensions - Front axle center: Ground clearance: 490 mm
19.3 in.
Operator station - Seat: Standard: Economy seat with mechanical suspension
Optional: Standard seat with air suspension
Hydraulic system - Number of mid selective control valves (SCVs): Up to three
Precision AG - Telematic: Optional: JDLinkâ„¢
Rear axle - Brakes, type and control: Primary brake (footbrake): Oil-cooled self-equalizing, self-adjusting, hydraulically actuated
Secondary brake: Hydraulically actuated, integrated into primary brake (lever on left-hand side of operator seat)
Park lock: Mechanical transmission park lock
Mechanical front-wheel drive (MFWD) braking: Automatic MFWD engagement (MFWD engaged for braking at speeds less than 5 km/h [3.1 mph])
Front axle brakes (optional): TLSâ„¢ with front axle brakes (oil cooled, self-equalizing, self-adjusting, hydraulically actuated)
Key Specs - Hydraulic pump rated output: Standard: 35-cc pump: 80 L/min
21 gpm
Optional: 45-cc pump: 114 L/min
30 gpm
Weight - Maximum permissible weight: 10,450 kg
23,038 lb
Drawbar - Drawbar category: Category 2
Key Specs - Transmission type: Standard: John Deere 24-speed PowrQuadâ„¢ Plus 40 km/h
Optional: John Deere 16-speed PowrQuad Plus 30 km/h
John Deere 24-speed AutoQuadâ„¢ Plus 40 km/h
John Deere 24-speed CommandQuadâ„¢ Plus 40 km/h
AutoPowrâ„¢/IVTâ„¢ 40 km/h
Creeper (PowrQuad Plus and AutoQuad Plus)
Engine performance - Rated PTO power (hp SAE): 74 kW
101 hp
Front hitch - Front power take-off (PTO): Electrohydraulically engaged with oil-cooled, multi-disc design
Front hitch - Electric power: Seven-pin electrical socket
Drawbar - Maximum vertical load: Road/field use (250-mm extended): 2000 kg
4409.2 lb
Field use (350-mm extended): 1400 kg
3086.5 lb
Field use (400-mm extended): 1200 kg
2645.5 lb
Additional information - Date collected: 19-Mar-20
Tires - Rear: 600/65R38 (175)
Engine specifications - Emission level: Stage V
Front hitch - PTO speed: 1000 PTO: 1969 rpm
Operator station - Instructional seat: Optional
Engine specifications - Rated speed: 2100 rpm
Rear hitch - Hitch category (SAE designation): 2/3N
Miscellaneous - Country of manufacture: Germany
Transmission - Type: Standard: John Deere 24-speed PowrQuad Plus 40 km/h
Optional: John Deere 16-speed PowrQuad Plus 30 km/h
John Deere 24-speed AutoQuad Plus 40 km/h
John Deere 24-speed CommandQuad Plus 40 km/h
AutoPowr/IVT 40 km/h
Creeper (PowrQuad Plus and AutoQuad Plus)
Engine performance - Maximum engine power: 106 kW
144 hp
w/ IPM: 115 kW
156 hp
Operator station - Radio: Optional integrated
Operator station - dB(A) rating: 70 dBA
Serviceability - Interval for engine coolant change: 6000 hours
Precision AG - Guidance: Optional: AutoTracâ„¢ on cornerpost display (straight track only), AutoTrac with 4240/4640 Universal Display
Dimensions - Overall height: 2940 mm
115.75 in.
Rear hitch - Rear axle differential lock: Electrohydraulically with oil-cooled clutch
Precision AG - Remote diagnostics: Optional: JDLink
Loaders - Lift capacity at full height: Non-self-leveling (NSL): 2515 kg
5544.62 lb
Mechanical self-leveling (MSL): 2181 kg
4808.28 lb
Operator station - Cab suspension: Optional: Mechanical Cab Suspension (MCS)
Dimensions - Overall length: 4485 mm
176.6 in.
Capacities - Crankcase oil volume: 16 L
4.2 U.S. gal.
Rear hitch - Maximum lift capacity behind lift points: Standard: 5000 kg
11,023.1 lb
Optional: 5700 kg
12,566.3 lb
Rear power take-off (PTO) - Type: Electrohydraulically operated, oil-cooled, multi-disc design
Standard: 38 mm (1.496 in.) 540, 1000 reversible shaft
Rear hitch - Remote control valves available: Standard
Rear power take-off (PTO) - Engine rpm (at rated PTO speeds): 540: 1977 rpm
1000: 1972 rpm
Dimensions - Approximate shipping weight, Open;Cab: Cab: 5800 kg
12,786 lb
Engine specifications - After treatment type: Lifetime diesel particle filter (DPF), diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhaust fluid (DEF)
  • Transmission: 24-speed PowrQuad™ Plus, 16-speed PowrQuad Plus, 24-speed AutoQuad™ Plus, 24-speed CommandQuad™ Plus, or AutoPowr™/IVT™
  • PTO HP: Max: At 1000 PTO rpm with IPM: 127 hp (93 kW) Rated: 102 hp (76 kW)
  • Hydraulics: Rated flow: 21.1 gpm (80L/min) or PFC of 30 gpm (114 L/min)
  • Engine HP¹: Max: 144 hp (106 kW) With IPM 156 hp (115 kW) Rated: 130 hp (96 kW) With IPM 150 hp (110 kW)
  • Loader Compatibility: 620R or 640R
  • Cab or Open Station: Both
Chris Vonholten

I felt like I had been doing business with Martin Tractor for years even though it was my first interaction with them.

Contact This Location